Hey guys i have poured over every post on here trying to find the answer but i still cannot work it out. I have put a VT V6 in my old ford transit van and now i am up to the point of making a modified chip to get her running. My original memcal is CJKU1912 $A5C and i am using the VT V6 V1.1 $A5C.xdf in tunerpro.
There is no bcm so i am trying to work out how to disable the fans from coming on and for the life of me cannot find how to disable the DTC 92 malf code which i have read on other posts needs to be done. Any help here is much appreciated even if somebody can link me a CJKU1912 bin that has VATS disabled and the fans set correctly for my situation.
Regards,
Matt
VT V6 in my van
-
gasute
- Posts: 44
- Joined: Tue Jun 08, 2010 3:50 am
- cars: VY V6 Ute
- Location: Victoria
-
Dylan
- Posts: 3364
- Joined: Mon Aug 02, 2010 8:35 am
- cars: VR Commodore V8
Re: VT V6 in my van
It may not be defined, use the latest bin and xdf from the enhanced section.
-
gasute
- Posts: 44
- Joined: Tue Jun 08, 2010 3:50 am
- cars: VY V6 Ute
- Location: Victoria
Re: VT V6 in my van
will that be ok for the vt v6 pcm?
Last edited by gasute on Tue Jan 23, 2018 12:21 am, edited 2 times in total.
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: VT V6 in my van
enhanced code uses the latest code, download the zip and all the files you need are in there ready to go.
viewtopic.php?f=27&t=2518
viewtopic.php?f=27&t=2518
-
gasute
- Posts: 44
- Joined: Tue Jun 08, 2010 3:50 am
- cars: VY V6 Ute
- Location: Victoria
Re: VT V6 in my van
Will i need to change the checksum before i burn it or does the xdf calculate this correctly?
-
gasute
- Posts: 44
- Joined: Tue Jun 08, 2010 3:50 am
- cars: VY V6 Ute
- Location: Victoria
Re: VT V6 in my van
also does set mean enable or disable when i want to change the DTC92 - Low Speed Fan Communication Failure