I have been seeing all of these Clone Tech 2 units on ebay and was wondering if they are actually worth the money or is it a waste of money ?
https://www.ebay.com.au/itm/Tech2-Car-F ... Sw63FaN2WG
Clone Tech 2
-
megajuz3003
- Posts: 74
- Joined: Sun Aug 26, 2012 11:47 am
- cars: 2001 VU SS
- Location: Brisbane
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Clone Tech 2
Seems like a lot of money compared to aliexpress... and its not the newer MDI interface, but maybe thats preferred for some people (not me). They work, but for how long? Cant say.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Tazzi
- Posts: 3626
- Joined: Thu May 17, 2012 10:53 am
- cars: VE SS Ute
- Location: WA
Re: Clone Tech 2
How long you ask?
... I have 3 sitting on my shelf.... dead
MDI has been great, other than the usbs eventually breaking off from lots of use (Can be fixed). This is revised in the newer MD2's where they use better connections again.
... I have 3 sitting on my shelf.... dead
MDI has been great, other than the usbs eventually breaking off from lots of use (Can be fixed). This is revised in the newer MD2's where they use better connections again.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726