EFI live custom Operating systems for N20

[80gus]

Has anybody played with the e38 efi live custom Operating system specifically the N20 switched Fuel and Spark tables.

Hoping some one has that and played with it and can give me a run down on how it works? if got HP but its not offered, i know HP can read some EFI live custom O/S but wonder if the tables would be present?

on a side note anyone selling EFI live or know of a good seller.

[antus]

I did the efi live training course with these guys. Theyre official resellers and really knew their stuff. http://www.apsservicecentre.com.au

[v8-tuning]

Oztrack is an efi live reseller still as far as I know.
To install a custom os you need efi live and full reflash using the correct custom os file then flash the calibration file.
The e38 custom os has nitrous tables so put in the correct values to pull timing
and wire a switch to ground or set it up to arm when the nitrous is switched on.
http://www.efilive.com/product-info-cus ... ng-systems

[Wade]

What about setting up for 2 and 3 bar maps sensors

[Wade]

Ive got the custom efi live xdf which works fine with the vy tunes in tunerpro. Would be nice to run boost

[Wade]

keen to see if boost is possible

[v8-tuning]

E38 can already do up to 3 bar with the right map sensor.
Just tune the virtual ve tables.
Ls1 pcm with custom os has boost tables up to 285kpa and nitrous tables.
I'm running 1 car with a turbo and other on nitrous they work great.