The first thing is the scaled map voltage shows 5 volts KOEO when it is actually 1.6 being a 3 bar map sensor.
Please have a look at my log and if anyone can explain why the injector BPW is going to zero. It's very noticeable after 1 min 58.
I have tried another ECU and memcal but nothing makes a difference.
Can't work out how to put up both XDL and ADX
so heres the XDL
Strange reading when logging 12P
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Strange reading when logging 12P
You do not have the required permissions to view the files attached to this post.
Last edited by Charlescrown on Thu May 10, 2018 2:44 am, edited 1 time in total.
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Strange reading when logging 12P
And heres the ADX.
You do not have the required permissions to view the files attached to this post.
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Strange reading when logging 12P
Problem fixed. After a lot of frustration a call from kojab resolved the problem. No shielding on the inductive trigger wiring. The wiring was replaced and the shielding earthed and it hasn't missed a beat in a couple of weeks and the idle can be set as low as 600rpm with no issues. I must have pushed the coil HT lead close to the wiring when I put in a new battery.
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Strange reading when logging 12P
Thanks for the update!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396