shift points

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 103
Joined: Wed Jan 23, 2019 12:14 am

Re: shift points

Postby Kevspec » Thu Mar 21, 2019 6:59 pm

im happy to help especially since everyone here is helping me and from what im being told with corrector its easy to put after as messes to much other stuff and easy to sort out

Site Admin
User avatar
Posts: 6349
Joined: Sat Feb 28, 2009 8:34 pm

Re: shift points

Postby antus » Thu Mar 21, 2019 7:00 pm

Yeah, it messes up the shift points, so your looking to make the sameish changes to the same tables (but for different reasons) as what you would need to do if you were to put it before the computer.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: shift points

Postby VL400 » Fri Mar 22, 2019 10:53 am

You need to modify the kickdown settings, these are used at (or near) WOT. There is a KPH and RPM threshold, both have to be met for it to shift.

Posts: 103
Joined: Wed Jan 23, 2019 12:14 am

Re: shift points

Postby Kevspec » Fri Mar 22, 2019 7:26 pm

Have found all the tables will go for drive shortly to test I also found a calculator to work out speed vs rpm with the gearbox ratios

Posts: 103
Joined: Wed Jan 23, 2019 12:14 am

Re: shift points

Postby Kevspec » Fri Mar 22, 2019 8:21 pm

ok went for a drive logged it seems to still hit limiters way before ive set everything

User avatar
Posts: 5314
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: shift points

Postby delcowizzid » Fri Mar 22, 2019 9:09 pm

So your hitting the limiter before the shift not shifting to early? I thought it wasn't reving out far enough before shifting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 103
Joined: Wed Jan 23, 2019 12:14 am

Re: shift points

Postby Kevspec » Fri Mar 22, 2019 11:16 pm

It's not and I've set all limters to 6200 and 6300 but won't go further then 5800 in gear

Site Admin
User avatar
Posts: 6349
Joined: Sat Feb 28, 2009 8:34 pm

Re: shift points

Postby antus » Sat Mar 23, 2019 7:13 am

Maybe post up a bin and a log?
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 2755
Joined: Thu Apr 09, 2009 12:31 pm

Re: shift points

Postby immortality » Sat Mar 23, 2019 10:09 am

What car/engine drive train mods etc?

Maybe it'll only rev to 5800 under full load.

You also need to remember that it takes time for the trans to shift so you need to give it a couple of hundred rpm margin.

Posts: 103
Joined: Wed Jan 23, 2019 12:14 am

Re: shift points

Postby Kevspec » Sat Mar 23, 2019 4:30 pm

here is my bin and log if anyone wants to look over it
Attachments
shift control.xdl
(104.43 KiB) Downloaded 131 times
Kevspecwideband.bin
(64 KiB) Downloaded 123 times

PreviousNext

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 10 guests