VBF to bin convert?

PSM 64 · Post by **PSM 64** » Tue Mar 05, 2019 4:15 am

........

VX L67 Getrag · Post by **VX L67 Getrag** » Tue Mar 05, 2019 7:43 pm

it all depends on what type it is, there's some models I can do manually, if you want to attach a test file I'll see what I can do!

avto · Post by **avto** » Mon Mar 18, 2019 10:14 pm

__________-

VX L67 Getrag · Post by **VX L67 Getrag** » Fri Mar 22, 2019 10:49 am

Just replied about it in other thread, but what it converts it to doesn't make a useable binary file as any program knows for our Au turbo diesel files!

rolls · Post by **rolls** » Sun Apr 21, 2019 7:58 am

VX L67 Getrag wrote:Just replied about it in other thread, but what it converts it to doesn't make a useable binary file as any program knows for our Au turbo diesel files!

What you are asking for doesn't really make sense. A VBF is a collection of binary segments, often these segments are for addresses as high as 0x80000000 which if you wrote to a binary file would produce a file about 10 gigabytes in size with mostly 0s.

Depending on what the final program expects, it may simply want a flattened array, eg all the segments stacked after each other, this would be useless for decompiling however as all the offsets would be wrong.

So to produce a bin file from a VBF you need to answer two questions, what is the VBF file layout (eg what segments are in it) and what does the program that expects a bin file expect, a file with real offsets? or a flattened file? Or something else entirely?

VX L67 Getrag · Post by **VX L67 Getrag** » Mon Apr 22, 2019 11:28 pm

Sorry, I've only played with a few in particular to suit the Ranger/BT50 & the other is for the Territory & the program I use to flash(PCMflash) can write using VBF & then convert to bin if needed.

ejukated · Post by **ejukated** » Wed Apr 24, 2019 8:26 am

VX L67 Getrag wrote:Sorry, I've only played with a few in particular to suit the Ranger/BT50 & the other is for the Territory & the program I use to flash(PCMflash) can write using VBF & then convert to bin if needed.

Which module are you using from PCMFlash for the Territory ?

VX L67 Getrag · Post by **VX L67 Getrag** » Thu Apr 25, 2019 11:05 am

The territories are module 43 & the ranger/bt50 are module 7!

ejukated · Post by **ejukated** » Thu Apr 25, 2019 2:41 pm

VX L67 Getrag wrote:The territories are module 43 & the ranger/bt50 are module 7!

Thanks, is it definitely Module 43? The listing I saw had it as the Bosch Land Rover ECU Land Rover EDC17СP42/MED17. My bench ECU is a Siemens SID2xx

VX L67 Getrag · Post by **VX L67 Getrag** » Fri Apr 26, 2019 2:39 am

YEP... although it's under JLR it's the same setup as our territory as I helped get the info for him to support it!

VBF to bin convert?

VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?

Re: VBF to bin convert?