supercharged vn v8
-
yoda69
- Posts: 1226
- Joined: Sun Mar 15, 2009 12:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: supercharged vn v8
Try Biggvl with 2 g’s and not bigvl
-
Gareth
- Posts: 2678
- Joined: Fri Mar 14, 2014 10:37 am
- Location: Bacchus Marsh, Vic
-
Blown vl
- Posts: 10
- Joined: Mon May 23, 2016 9:19 am
- cars: Vl v8 supercharged
Re: supercharged vn v8
Sorted now, not sure what was going on I just clicked the profile and send message
All good tho have made contact
All good tho have made contact
-
Blown vl
- Posts: 10
- Joined: Mon May 23, 2016 9:19 am
- cars: Vl v8 supercharged
Re: supercharged vn v8
Ok i have connected to the car today and taken a recording of the throttle that jumps. i used
Kalmaker_SP3_N05 TP5 delco.adx and KALMAKER SP3 N03 XDFversion 1.xdf.
here is the file hopefully i have done this right if not some guidance would be appreciated, Also cn i extract the tune file from my kalmaker tuned ecu for some one to convert?
Kalmaker_SP3_N05 TP5 delco.adx and KALMAKER SP3 N03 XDFversion 1.xdf.
here is the file hopefully i have done this right if not some guidance would be appreciated, Also cn i extract the tune file from my kalmaker tuned ecu for some one to convert?
You do not have the required permissions to view the files attached to this post.
-
Blown vl
- Posts: 10
- Joined: Mon May 23, 2016 9:19 am
- cars: Vl v8 supercharged
Re: supercharged vn v8
Hey guys don't suppose anyone had a look at the log I posted? Also does anyone have a bin file I could use on this engine while doing the data logs?
-
delcowizzid
- Posts: 5709
- Joined: Sat Feb 28, 2009 10:38 am
- Yahoo Messenger: [email protected]
- Location: Wellington NZ
Re: supercharged vn v8
I'll have a look at the log later if I get a chance
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
Blown vl
- Posts: 10
- Joined: Mon May 23, 2016 9:19 am
- cars: Vl v8 supercharged
Re: supercharged vn v8
Great thanks Delco wizard, I'm just wanting to get the thing sorted to use it a bit and then start winding it up!