Tuning VR V8 AUTO TURBO

[vn5000]

After you have connected to ecm go to custom setting and set rom mapping to 0000 - ffff ,click get bin tab , if youve done it right you will definitely get a 64 kB bin .The bin you posted is not vr man id say its another half bin.

[Jayme]

well I can tell you its main spark table is at 0x68. what size cam is it for? I wouldnt be runnin it in your turbo car, with a 2 bar map sensor, its gonna ping its ring off. doesnt looke like too bad of a tune tho. ive run more advance in a cammed motor but it was on 8.5:1 compression tho.

[turbov8]

After you have connected to ecm go to custom setting and set rom mapping to 0000 - ffff ,click get bin tab , if youve done it right you will definitely get a 64 kB bin .The bin you posted is not vr man id say its another half bin.

i dont know whats going on.. I set the rom mapping twice and gave me 32kbs
Just done it again and got the full 64kbs
Could it be the bjkt ??
I have a Blcc here if thats any better?

heres the full bin

enhancedtune2.bin

[delcowizzid]

$11 version D xdf

[vn5000]

Whats on the other memcal?
You would think for 1500 you would at least get a kalmaker bin with the extra resolution maps.

[turbov8]

well I can tell you its main spark table is at 0x68. what size cam is it for? I wouldnt be runnin it in your turbo car, with a 2 bar map sensor, its gonna ping its ring off. doesnt looke like too bad of a tune tho. ive run more advance in a cammed motor but it was on 8.5:1 compression tho.

Was just a small cam.. nar not going to use it for 2 bar and boost....

[turbov8]

Whats on the other memcal?
You would think for 1500 you would at least get a kalmaker bin with the extra resolution maps.

Yeah you would think so...
I will upload the other memcal for you

[VL400]

So how can it say its manual??

I use the tech-1 calibration data to ID the tune so maybe the tune you have has had this modified. If its in a VR auto PCM it will be 64k so use the custom mapping option and disregard the manual ID stuff.

EDIT: FlashTool V130 now asks if manual or auto when it detects a VR is connected. Using the tech-1 calibration its not possible to ID the trans type and then the PCM memory mapping.

[turbov8]

So how can it say its manual??

I use the tech-1 calibration data to ID the tune so maybe the tune you have has had this modified. If its in a VR auto PCM it will be 64k so use the custom mapping option and disregard the manual ID stuff.

EDIT: FlashTool V130 now asks if manual or auto when it detects a VR is connected. Using the tech-1 calibration its not possible to ID the trans type and then the PCM memory mapping.

V130 works a treat! No problems now

Heres another tune for anyone interested.

Vr V8 Auto with cam and blue top injectors. (apparently)
$11 Rev B

rcctune1.bin

checked timing mechanically today and seems all ok but cant get the bitch to start.
Will try new coil and another module have in the shed tomorrow.
Damn car!

[delcowizzid]

wont start with any of the tunes bar the one tuned to the big injectors will drown it pretty easy