Numbers fall in the range of 3000-3021 from memory. Assume it's just a production number and not model number?
Cheers
Siemens Deka Injector Identification
Siemens Deka Injector Identification
Is anybody able to identify these injectors? Can't find anything on them that gives an idea of flow rate etc. Apparently were on a cammed 304.
Numbers fall in the range of 3000-3021 from memory. Assume it's just a production number and not model number?
Cheers
Numbers fall in the range of 3000-3021 from memory. Assume it's just a production number and not model number?
Cheers
-
vlad01
- Posts: 8120
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Siemens Deka Injector Identification
I got these on my VR v6, they are just an OEM stock replacement for the 20Lb factory 917/930 Bosch injectors.
I got them as I was sick of leaking factory injectors, they don't atomize as good though.
here is the data The1 generated for these dekas. part number for them is FI11318. If you google them the only result that comes up is an old thread from this forum where I posted about them
I got them as I was sick of leaking factory injectors, they don't atomize as good though.
here is the data The1 generated for these dekas. part number for them is FI11318. If you google them the only result that comes up is an old thread from this forum where I posted about them
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.