PCM Hammer P01 and P59 flash tool v015

[Vampyre]

12 0A AC 6D 10 F0 36 10 F0 36 80 0A A0 FF 91 5E 00 7C 07

Unknown data
Priority device and mode
Unknown data pretty sure its size and address by looking at your message structure
First bytes of uploading kernl

[antus]

That looks messed up. First bytes are avt protocol length. Looks like you have prio device dest src mode submode twice for some reason. Theres an extra 10 f0 36 in there. 36 80 means upload and execute. 36 00 means just upload.

[Vampyre]

12 0A AC 6D 10 F0 36 80 0A A0 FF 91 5E 00 7C 07

my bad accidentally pasted it twice when doing colors

and yes im using an avt852 that i usually use for winflash

post below is from time I hit write buttom till after first data block is written

so guessing its kernel load and first 4k data block
fyi this is only the write side of things

[antus]

Sorry, i deleted your post with the data logs from winflash as I dont think it should be on the site. Please lets keep this thread about pcmhammer.

[Vampyre]

no problem sorry about that, my question is will any info from it assist in figuring out how to get 60*v6 pcm working

[antus]

Well thats a curly question. We cant just use it and if we can learn from it at all would vary country by country. And if you can use it in yours, can the software be used in another? Generally, if you were to do that, a clean room approch would required. But i am not a lawyer, and its a lot safer to not use it at all, which i would recommend. https://en.m.wikipedia.org/wiki/Clean_room_design

[Vampyre]

didnt mean the kernel it doesnt write what i need anyway, more along lines of data for where to load the kernel. you told me a while back that was one of the things we would need, a place in ram to load kernel.

after tinkering with all the checks in hammer i got this log

[04:59:17:425] Suppressing VPW chatter.
[04:59:17:426] TX: 6C FE F0 28 00
[04:59:17:428] Sending 'test device present' notification.
[04:59:17:429] TX: 8C FE F0 3F
[04:59:17:484] Sending seed request.
[04:59:17:485] TX: 6C 10 F0 27 01
[04:59:17:486] RX: 6C F0 10 68 00
[04:59:17:487] Parsing seed value.
[04:59:17:488] Unable to parse seed response. Attempt #1
[04:59:17:506] RX: 6C F0 10 67 01 51 EF
[04:59:17:507] Parsing seed value.
[04:59:17:507] Sending unlock request (EF51, ABBE)
[04:59:17:508] TX: 6C 10 F0 27 02 AB BE
[04:59:17:530] RX: 6C F0 10 67 02 34
[04:59:17:531] Unlock succeeded.
[04:59:17:536] Sending 'test device present' notification.
[04:59:17:537] TX: 8C FE F0 3F
[04:59:17:591] Attempting switch to VPW 4x
[04:59:17:595] TX: 6C FE F0 A0
[04:59:17:618] RX: 6C F0 10 E0 AA
[04:59:17:618] Parsing 6C F0 10 E0 AA
[04:59:17:620] Module 0x10 (engine controller) has agreed to enter high-speed mode.
[04:59:17:623] Sending 'test device present' notification.
[04:59:17:624] TX: 8C FE F0 3F
[04:59:18:625] Waited 2seconds.. no data present
[04:59:18:626] AVT: no message waiting.
[04:59:18:627] Sending 'test device present' notification.
[04:59:18:627] TX: 8C FE F0 3F
[04:59:18:629] TX: 6C FE F0 A1
[04:59:19:630] Waited 2seconds.. no data present
[04:59:19:631] AVT: no message waiting.
[04:59:20:633] Waited 2seconds.. no data present
[04:59:20:634] AVT setting VPW 4X
[04:59:20:635] Sending 'test device present' notification.
[04:59:20:635] TX: 8C FE F0 3F
[04:59:20:638] Error accessing file C:\Users\jay\AppData\Local\Apps\2.0\PG5G15OL.V7V\AD8ZWOO6.X0J\pcmh..tion_efcdf2a69a214e4e_0001.0000_f2d04e2b30d23bdc\kernel.bin
[04:59:20:639] Failed to load kernel from file.
[04:59:20:642] Elapsed time 00:00:03.1096398

[antus]

Cool so thats a pc side problem but its passed the unlock. What happens if you send the normal kernel? Does it respond that its running? Can it ID the flash memory?

[NSFW]

That kinda looks like you ran the EXE directly from the zip file.

Try unzipping everything into a new directory, and run PcmHammer.exe from there.

[MudDuck514]

Hi all,

Looks like someone has made some progress with the V6 PCMs!
Hopefully you will continue making progress as there are many of these vehicles on the road.
I for one look forward to being able to tinker with the GM 3400; such as the one in the Olds Alero, Pontiac Grand AM etc.

Mike