Information and discussion of EFI hardware and specifications
antus
Site Admin
Posts: 10111 Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi TX Gemini SR20 18psi Datsun 1200 Ute Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B Subaru WRX 2007
Post
by antus » Sat Jan 07, 2012 4:02 am
VL400 wrote: Might need to have a play with "TPS - TPS Full travel - Worst case minimum voltage". Go WOT at check the TPS voltage in TP, just make the worst case voltage a tad lower than that.
This was needed, as was a wiring change - we didnt have it quite right. But its working well now! (Swapped black and blue around)
Code: Select all
Nissan Delco
------ -----
Green/Black --> Grey
Green/Red --> Blue
Green --> Black
You do not have the required permissions to view the files attached to this post.
muttley383
Posts: 83 Joined: Mon Aug 24, 2009 12:21 am
cars: VR 383 stroker
Post
by muttley383 » Mon Jan 09, 2012 8:37 am
You can use a generic glorified potentiometer like in the attached image.
Used to be able to purchase them from RS components or Farnell(Element?)
You do not have the required permissions to view the files attached to this post.
Holden202T
Posts: 10436 Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW
Post
by Holden202T » Mon Jan 09, 2012 10:38 am
that looks the same as the apparently falcon TPS i saw on a walkinshaw manifold i tuned.
muttley383
Posts: 83 Joined: Mon Aug 24, 2009 12:21 am
cars: VR 383 stroker
Post
by muttley383 » Mon Jan 09, 2012 12:05 pm
I just had a look on ebay and you can get something very similar to what I posted above from the USA for about $20.00