camira wiring into toyota
-
delcowizzid
- Posts: 5630
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: camira wiring into toyota
bluetops in a 4 cylinder good for 150 hp at the crank boosted
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
antus
- Site Admin
- Posts: 9017
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: camira wiring into toyota
That sounds about right to me. Very roughly half as much power from half as many injectors. In my stock Isuzu G200W 2L engine I get 80kw (107hp) at the wheels unboosted. Would need to watch the injector duty cycle and limit boost when you run out of fuel and as you say look in to that injector upgrade. Siemens deka are often used and have good data available for the Delco. 60 or 90lb. Idle is fine with the 808 swapping to single fire mode at low rpm.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: camira wiring into toyota
dizzy blank looks awesome man good job. 