Everything seems to be working well now, I've uploaded a ton of random firmware files, TCM, boot sectors, any PHF file I have ran across. They all load and seem to dump file sizes that make sense to how I programmed the tool.
I'd of course need raw bin files directly from the devices to compare against the converted files to fully validate, but in theory the site should work with just about everything, the only questionable part is the padding of the file. Most seem to include a file type header, so any special cases can likely be based on that header.
Either case, feedback and confirming the resulting bin is the correct size and flashes correctly with the padding and such is always welcomed.
Here are some of the file types I've ran across:
Code: Select all
SPANISHOAK
GREENOAK-1536K
BOAK
ETMHC12
BOAK
GREENOAK
GREENOAK-Siemens-P356-2M
Silver Oak
SILVEROAK-BOSCH-HWI
SILVEROAK-Siemens
SILVEROAKVIST5R2048K
Code: Select all
VK2-C3803
ME9.0
VK2-C3901
8T4A-12B684-AA
SBU-471
VH2-W1614
ASV-125
VK3-L5801
LBO-527
DPU-231A
DPU-232
DPU-252A
DPU-251A
DPU-461
DPU-462
8C3A-12B684-BA
TCM-ASM
EDC7C1
EDC16C3
Transmission Control Module
ESU-131
EDC16C34
EDC16C34-4.33
SID803
Power liftgate
VRM
BG3-L1721
TCM
8G1A-12B684-CA
BG3-L1731
VK2-C3815
9W7A-12B684-DA
SIM24
HBO-424
SID206
SID83A
EDC16C7-7.30
MED7.8.1