Universal patcher master j console xml script for GMlan

[04colyZQ8]

I can’t send any commands only log? Do we need to enable checksums or something??

[04colyZQ8]

what do you make of this log?
[19:29:54.141] 00 00 01 00
[19:29:54.193] 00 00 01 01 FD 02 10 04 00 00 00 00 //wakeup?
[19:29:54.216] 00 00 06 2D 01 04 00 00 00 00 00 00
[19:29:54.219] 00 00 06 41 01 50 00 00 00 00 00 00
[19:29:54.232] 00 00 06 21 01 40 00 00 00 00 00 00
[19:29:54.444] 00 00 02 4C 03 22 C0 10 00 00 00 00
[19:29:55.317] 00 00 06 21 00 40 00 00 00 00 00 00
[19:29:56.237] 00 00 06 21 00 40 00 00 00 00 00 00
[19:29:57.217] 00 00 06 2D 00 04 00 00 00 00 00 00
[19:29:57.243] 00 00 06 21 00 40 00 00 00 00 00 00
[19:29:58.348] 00 00 06 21 00 40 00 00 00 00 00 00
[19:29:59.259] 00 00 06 21 00 40 00 00 00 00 00 00
[19:29:59.925] 00 00 02 4C 03 22 83 99 00 00 00 00
[19:29:59.928] 00 00 06 4C 07 62 83 99 00 00 63 A2
[19:29:59.977] 00 00 01 01 FD 02 10 04 00 00 00 00
[19:29:59.999] 00 00 06 41 01 50 00 00 00 00 00 00
[19:30:00.093] 00 00 01 01 FD 02 10 04 00 00 00 00
[19:30:00.134] 00 00 06 41 01 50 00 00 00 00 00 00
[19:30:00.222] 00 00 06 2D 00 04 00 00 00 00 00 00
[19:30:00.275] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:00.297] 00 00 01 01 FD 02 10 04 00 00 00 00
[19:30:00.319] 00 00 06 41 01 50 00 00 00 00 00 00
[19:30:01.295] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:02.390] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:03.262] 00 00 06 2D 00 44 00 00 00 00 00 00
[19:30:03.301] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:04.401] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:05.318] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:06.431] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:07.330] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:08.429] 00 00 06 21 00 40 00 00 00 00 00 00
[19:30:09.345] 00 00 06 21 00 40 00 00 00 00 00 00

[04colyZQ8]

I think somehow I am not getting extended low speed lan packets?

[04colyZQ8]

I am looking for onstar chevy app lock and unlock. I do not see any 97 or 90 or any other address for the onstar in these logs? Perhaps its sent via high speed CAN? I do not know what messages are sent from the onstar module?

[ironduke]

I'm not 100% sure on this but since onstar/vcim has high speed connections I would guess that's where the messages are if your not seeing the lock/unlock commands..

[gmtech825]

0024e000 might be the message you're looking for on LS. byte 1 bits 0-2

[04colyZQ8]

Ok thanks that message is not on the low speed logs so prob high speed. Question will extended packets on low speed show up in the non extended log or do I need to change my filters? I can share my xml and someone who has a known setup can the extended low speed can see if they get any messages on the log window.

[gmtech825]

don't look for that exact match. it will likely be something like 1024e097. do you see any messages with 0x97 for byte 3?