vp v6 startup issues
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: vp v6 startup issues
its in the ose12p zip file where you also got the adx, xdf. write one of the ones with 'stacked' in the filename to the nvram. when you unpluh the nvram chip from the board to put it in the programmer be extra careful. The pins are thin and easy to bend and break, especially the last one to come out if it pops out quickly. So make sure it comes out slowly. On the way back in make sure all the pins are going down the sockets, sometimes one can catch on the edge and bend instead. only apply the pressure to push it right down after you can see they are all going in properly.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Hey antus.
thanks, I bought the nvram from Gareth just recently, he loaded the file in it for me, so I don't think I have ose12p zip file,
I installed the nvram, soldered in the write wire and usb comms as per instructions and am now floundering due to ignoance!
Trying hard to ensure I have a complete understanding of exactly what I am doing and why, but my ageing feeble pea brain does have limitations.
Let me know.
Cheers Luke.
thanks, I bought the nvram from Gareth just recently, he loaded the file in it for me, so I don't think I have ose12p zip file,
I installed the nvram, soldered in the write wire and usb comms as per instructions and am now floundering due to ignoance!
Trying hard to ensure I have a complete understanding of exactly what I am doing and why, but my ageing feeble pea brain does have limitations.
Let me know.
Cheers Luke.
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: vp v6 startup issues
click the link in my signature to the FAQ and have a look there. Lots of information and links to the threads you'll need including ose12p itself.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: vp v6 startup issues
hey dont hate on me, but Luke have you thought about using onerom setup, check my onerom app out. it simplifies things, then you got real time though moates emu ??
You can still use ose12p
and there cheap
let me know if you need help setting it up. if you decide
You can still use ose12p
let me know if you need help setting it up. if you decide