Re: FX Holden Race Car Project
Posted: Tue Aug 02, 2016 3:32 pm
before you mount it height wise make sure the stearing arms are parrellel to the lower arms so it dont bump stear
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
FX Holden Race Car Project
Page 11 of 144
Re: FX Holden Race Car Project
Posted: Tue Aug 02, 2016 3:42 pm
yeah i need to slightly bend the plates up to get it about 10mm higher so they are in line! but haven't done it yet as i was using them as a template to duplicate for the top ones!
Re: FX Holden Race Car Project
Posted: Tue Aug 02, 2016 11:01 pm
Lights turned up today!
Sorry the pictures don't do them much justice!
- received_10155078448727501.jpeg (61.42 KiB) Viewed 5406 times
- received_10155078448752501.jpeg (42.87 KiB) Viewed 5406 times
Re: FX Holden Race Car Project
Posted: Wed Aug 03, 2016 7:35 pm
made some good progress on the rack today, the location and mounts are sorted and locked in! just need to make the gussets on the sides! probably should start on getting the rest of the rack bits modified I guess lol
The next pictures for you delcowizzid 
- P1130419.JPG (480.21 KiB) Viewed 5378 times
Re: FX Holden Race Car Project
Posted: Wed Aug 03, 2016 8:39 pm
Nice work!
Re: FX Holden Race Car Project
Posted: Wed Aug 03, 2016 9:06 pm
thanks!
Re: FX Holden Race Car Project
Posted: Thu Aug 04, 2016 2:39 pm
Looking good 
Seriously fast progress!!!
Seriously fast progress!!!Re: FX Holden Race Car Project
Posted: Thu Aug 04, 2016 3:10 pm
looks great
Have you thought about bump steer?
Have you thought about bump steer?
Re: FX Holden Race Car Project
Posted: Thu Aug 04, 2016 4:24 pm
yes and no ...
no in that for a drag car doing only straight line racing it shouldn't be too much of an issue....
that said i am copying directly from one that was setup in an FB Ute and it is as good as it gets for old holdens bump steer wise, so provided i locate it in the right position it should be the same....
no in that for a drag car doing only straight line racing it shouldn't be too much of an issue....
that said i am copying directly from one that was setup in an FB Ute and it is as good as it gets for old holdens bump steer wise, so provided i locate it in the right position it should be the same....
Re: FX Holden Race Car Project
Posted: Thu Aug 04, 2016 4:35 pm
in any case it can only be better than steering box and idler arm