Software On ELM Street - OBD2 Software Development

Programs / Tools / Scripts
Post Reply
User avatar
Tazzi
Posts: 3550
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:
Contact Tazzi

Re: Software On ELM Street - OBD2 Software Development

Post by Tazzi »

Chuff wrote:OMG!!

I have just upgraded to the latest version and things have definitely advanced since the version I last saw.

I look forward to running all the additional functionality you have now so graciously provided us all with.

Excellent work to yourself and all concerned.

Chuff
:lol:
Slowly but surely :thumbup:

Next on the list is the MX and AVT support, and also revisiting the "freeze data" (shiver) again. I want that functionality to work.. but it seems the ELM/MX really dislike it.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Top
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Software On ELM Street - OBD2 Software Development

Post by Jayme »

I wouldnt mind if the freeze data is AVT only feature :)
Top
User avatar
Tazzi
Posts: 3550
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:
Contact Tazzi

Re: Software On ELM Street - OBD2 Software Development

Post by Tazzi »

Jayme wrote:I wouldnt mind if the freeze data is AVT only feature :)
Yeah, Im thinking Ill put a simple warning saying "This action is suitable with the AVT interface, it may not work using an ELM or MX device".
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Top
User avatar
Tre-Cool
Posts: 414
Joined: Tue Oct 16, 2012 12:17 pm
cars: VY SS UTE, VX Drag Car
Location: Perth
Contact:
Contact Tre-Cool

Re: Software On ELM Street - OBD2 Software Development

Post by Tre-Cool »

Im in Perth and have spare e38/ls1 ecu's you can borrow.

Do u have a bench harness though?
Top
User avatar
Tazzi
Posts: 3550
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:
Contact Tazzi

Re: Software On ELM Street - OBD2 Software Development

Post by Tazzi »

Tre-Cool wrote:Im in Perth and have spare e38/ls1 ecu's you can borrow.

Do u have a bench harness though?
Iv got the VE SS out side so theres an E38 to test on :thumbup:
Dont think it has any freeze faults though.. hmmm... might have to try power it up outside of car to test

Dont have any bench harnesses for the E38 or LS1 currently. Havent found any more harnesses at the wreckers which didnt cost an arm and a leg.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Top
VX L67 Getrag
Posts: 2959
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:
Contact VX L67 Getrag

Re: Software On ELM Street - OBD2 Software Development

Post by VX L67 Getrag »

I can tell you the wire combo if you do get a harness to cut up for bench!
Top
User avatar
Tazzi
Posts: 3550
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:
Contact Tazzi

Re: Software On ELM Street - OBD2 Software Development

Post by Tazzi »

VX L67 Getrag wrote:I can tell you the wire combo if you do get a harness to cut up for bench!
Sounds like a plaaaaaaan!
Ill harass some wreckers tomorrow and see if I cant find some ecu plugs.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Top
User avatar
Tazzi
Posts: 3550
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:
Contact Tazzi

Re: Software On ELM Street - OBD2 Software Development

Post by Tazzi »

Right,

So there is a little big that has been pointed out to me for the LS1 fault code reading. During development/debug I left in a few lines of code which are triggered when a certain fault is found causing the "display" to clear! :wtf:

So, there have been a couple people with 2/3 faults and only 1 fault actually displaying. Its due to this little debugging lines I left in the software during the latest update.

I will be rolling out a fix asap to resolve this little issue. :thumbup:
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Top
User avatar
Tre-Cool
Posts: 414
Joined: Tue Oct 16, 2012 12:17 pm
cars: VY SS UTE, VX Drag Car
Location: Perth
Contact:
Contact Tre-Cool

Re: Software On ELM Street - OBD2 Software Development

Post by Tre-Cool »

  • ECU Pin E38 T42 E83 Wire Colour
    Ground 13 49 38 black
    12V Constant 20 32 12 orange
    12v Switched 19 11 36 pink
    12v Switched 47 31 14 pink
    Can + 28 38 10 brown-black
    Can - 27 37 11 brown
Top
VX L67 Getrag
Posts: 2959
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:
Contact VX L67 Getrag

Re: Software On ELM Street - OBD2 Software Development

Post by VX L67 Getrag »

What is an E83 for?
Top
Post Reply

Return to “Tools”