Page 16 of 18
Re: Trigger points for CAS.
Posted: Mon Jan 12, 2015 7:54 pm
by Holden202T
nice!!
only thing wrong with those pictures is the hydraulic clutch adaptor for a torana! luckily the JZED head offsets its badness by quite a bit
Re: Trigger points for CAS.
Posted: Mon Jan 12, 2015 8:21 pm
by Macca97
Looking good mate
, ive also been watching on the torana forum
Re: Trigger points for CAS.
Posted: Tue Jan 13, 2015 7:50 am
by GH1176
Been thinking of going to a under dash clutch master setup but the $700 for it is making it wait until last.
Re: Trigger points for CAS.
Posted: Tue Jan 13, 2015 11:59 am
by Holden202T
well put it this way, the clutch worked perfectly fine ...... the problems were that it was very on and off and the pedal was heavy, it also put side load on the piston in the master cylinder and eventually made it leak from wear.
Re: Trigger points for CAS.
Posted: Tue Jan 13, 2015 1:17 pm
by GH1176
I'll paint it black along with most of everything else and hopefully blends in.
Re: Trigger points for CAS.
Posted: Tue Jan 13, 2015 6:22 pm
by GH1176
I fitted the inlet manifold today to see how much it covered up the side, I'm about to remake the runners and planing to raise the height of the plenum and shortern the runner length. And it will be all one piece when finished as the hoses makes it easier to play with at the moment.
Re: Trigger points for CAS.
Posted: Tue Jan 13, 2015 8:08 pm
by Holden202T
you really need to finish this project quicker hahahah
looks pretty fast!
Re: Trigger points for CAS.
Posted: Wed Jan 14, 2015 1:47 am
by GH1176
Been working on the motor for 8 and a half years and had the car since 93.
I'm in no rush.
Re: Trigger points for CAS.
Posted: Wed Jan 14, 2015 6:39 am
by Holden202T
lol
Re: Trigger points for CAS.
Posted: Wed Jan 14, 2015 7:48 am
by v6bucket
Changing the plugs looks like a challenge.
