Re: FX Holden Race Car Project
Posted: Sat Sep 17, 2016 5:33 am
It seems to be a bit of a trend with your builds at the moment.
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
FX Holden Race Car Project
Page 16 of 144
Re: FX Holden Race Car Project
Posted: Sat Sep 17, 2016 8:05 am
Yeah i know, this one shouldnt be as bad as the bedford though!
Re: FX Holden Race Car Project
Posted: Sun Sep 18, 2016 6:51 pm
Turbo fits 
Will probably rotate the turbo to be more straight and thinking i'll most likely send the exhaust out the inner guard too, should help get the exhaust heat away from the inlet and help with under bonnet temps!
Will probably rotate the turbo to be more straight and thinking i'll most likely send the exhaust out the inner guard too, should help get the exhaust heat away from the inlet and help with under bonnet temps!
- WP_20160917_13_41_44_Pro.jpg (328.72 KiB) Viewed 5152 times
- WP_20160917_13_41_37_Pro.jpg (259.71 KiB) Viewed 5152 times
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 7:18 pm
this arrived today, unfortunately there is a lot to do before i can use it!
- notch master.jpg (75.04 KiB) Viewed 5130 times
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 7:22 pm
Like what? Looks like a nice bit of gear aside from the cheap looking hole saw...
I'll get those boot hinges in the post this week, this thread just reminded me why they're sitting on my bench
I'll get those boot hinges in the post this week, this thread just reminded me why they're sitting on my bench
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 10:04 pm
Well for starters i need to get roll bar pipe, but then i cant install that till i have the chassis rails in and the 4 link rear end
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 10:36 pm
how does a 4 link work as oppose to a 5 link?
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 10:49 pm
I assume by 5 link you mean panhard bar as the 5th link ?
http://www.mcdonaldbrosracing.com.au/4link.html
http://www.mcdonaldbrosracing.com.au/4link.html
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 10:54 pm
yes thats what I mean. So basically its just a 5 link with different definition used.Holden202T wrote:I assume by 5 link you mean panhard bar as the 5th link ?
http://www.mcdonaldbrosracing.com.au/4link.html
Re: FX Holden Race Car Project
Posted: Mon Sep 19, 2016 11:17 pm
Call it what you want, everyone else calls them a 4 link!