pcmhacking.net

vlad01 wrote:You could try BAYA 7003 VN group A tune which is based on the later $DB code and says it has a service fix for idle.

I’d like to try this. Are you able to make a memcal with it on it for me? Only thing that appears to be different for the VN Group A is injectors are slightly larger. Cam is the same.

'quipt4it wrote:Have you compared it to the Torque Chip jobbie?

Yea I did. It’s from a 304 I used to have. It was worse.

I could, but I will need your original memcal as it has the correct v8 netres chips and v8 knock filter. I only got V6 ones here which means the knock filter is different as well as the netres chips.

Delcowizzid is closer, you could put it to him.
Use the Torque Chip as the spare.
Not sure if you would gain anything though.

vlad01 wrote:I could, but I will need your original memcal as it has the correct v8 netres chips and v8 knock filter. I only got V6 ones here which means the knock filter is different as well as the netres chips.

Standby. I have another memcal. Just got to find it.

Here it is.

'quipt4it wrote:Delcowizzid is closer, you could put it to him.
Use the Torque Chip as the spare.
Not sure if you would gain anything though.

I’ve tried but he isn’t answering me.

Would suck loosing the memcal sending across the pond to me, thats the only thing that worries me.

VR 5.0 Auto = BFPL 2416 $11A
Won't work

'quipt4it wrote:VR 5.0 Auto = BFPL 2416 $11A
Won't work

Oh so the memcal can’t be wiped and started again?