Page 3 of 3
Re: VX ecotec won't hold first gear
Posted: Tue Nov 12, 2024 8:02 pm
by yoda69
I’ll need to double check. It should be for the maximum gear available when D1 is selected. Normally this is set to 2 causing the upshift and changing it to 1 will make it hold first.
Re: VX ecotec won't hold first gear
Posted: Wed Nov 13, 2024 4:22 am
by yoda69
Chr0m3 I had a proper look this time, you are correct original information I provided is incorrect and is in the IAC area.
I'll go back and put a comment with a correction in the earlier post to avoid future issues.
To get the vehicle to hold first gear in D1 change $01 to $00 at $424F.
Re: VX ecotec won't hold first gear
Posted: Wed Nov 13, 2024 7:35 am
by Chr0m3
Easy, I was just curious if I was missing something, I've always made gears hold by changing the low mode upshift speed, but your way will work to.