253 V8 carby selection

['quipt4it]

.

[Madmatt2006]

I'll take the electronic choke back off and take a look tomorrow. I have put a vacuum cap here already will that work?

cap.jpg

['quipt4it]

.

[Madmatt2006]

I did not see this when I fitted electronic choke!

this.gif

I will remove choke and take some photos tomorrow

[Madmatt2006]

If nothing has been removed yes, that will work.
Does the electric choke use the original housing?

Yes I got this electronic choke
https://www.ebay.com.au/itm/222666436699

['quipt4it]

.

[Madmatt2006]

"Used to convert that bad old hot air choke system
winter start ups will never be the same again"

Hahaha

Hahaha (I'm praying)

I hope so!!.jpg

Just check to see if the seal is there in the first place. will do!

[Madmatt2006]

That should be OK. As long as there is a seal or gasket behind that cover.
If you didn't remove the housing it's good.
Just check to see if the seal is there in the first place.
I like their description:

"Used to convert that bad old hot air choke system
winter start ups will never be the same again"

Hahaha

Hi Guy's been busy

Electronic choke installed and hoses, water, vac. If you see anything wrong in the pictures let me know.

engine hoses 1.jpg

engine hoses 2.jpg

engine hoses 3.jpg

engine hoses 4.jpg

I've been busy today will post a few things

[Madmatt2006]

next bit ! I ran in to Wiring issues, melted?

wireing plugs1.jpg

wireing plugs 2.jpg

wiring4.jpg

[Madmatt2006]

Decided pull wiring from parts car

parts car wiring.jpg

parts car wiring 1.jpg