Vt v6 van dual fuel
-
Jervies
- Posts: 199
- Joined: Wed Nov 09, 2011 7:35 am
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Vt v6 van dual fuel
Well im using the1's vs adx (vt adxs wont connect) and the vt xdf you modded for me. Ill have a play and see what i come up with
-
Jervies
- Posts: 199
- Joined: Wed Nov 09, 2011 7:35 am
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Vt v6 van dual fuel
Both the xdf and the adx were different. All fixed now.
Cheers
Cheers
-
Jervies
- Posts: 199
- Joined: Wed Nov 09, 2011 7:35 am
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Vt v6 van dual fuel
Does anyone know about changing settings to do with petrol start, and switching to petrol at high throttle ect?
-
tris909
- Posts: 80
- Joined: Fri Mar 22, 2013 8:49 am
- cars: VN s1 V6 Eaton m62 s/c
- Location: South East VICTORIA
Re: Vt v6 van dual fuel
im also having the same issue with a vt S2 v6 in the "Milligrams per Second per Cylinder" I can not get it to trace out of 50kpa in injector rate constant vs mg/cyl vs rpm, and also in other tables. is there any adjustments in these snap shots I have taken to get it to read out of 50kpa
You do not have the required permissions to view the files attached to this post.
-
tris909
- Posts: 80
- Joined: Fri Mar 22, 2013 8:49 am
- cars: VN s1 V6 Eaton m62 s/c
- Location: South East VICTORIA
Re: Vt v6 van dual fuel
sorry missed the main one...
You do not have the required permissions to view the files attached to this post.
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 4:54 am
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
Re: Vt v6 van dual fuel
You need to edit the XDF, select the item and press F2. On the Rows and Columns tabs change the "data type" and "stock units" to match the ADX - Mass Air Flow and milligrams in your ADX pic for the columns.
You can playback existing logs to test data tracing works. So can setup more tables without needing to connect up to the car.
You can playback existing logs to test data tracing works. So can setup more tables without needing to connect up to the car.
-
tris909
- Posts: 80
- Joined: Fri Mar 22, 2013 8:49 am
- cars: VN s1 V6 Eaton m62 s/c
- Location: South East VICTORIA
Re: Vt v6 van dual fuel
all sorted, had "none" in stock units for columns. will have a try with it on the car tomorrow 