Mrfiat's fiat 131
-
Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Mrfiat's fiat 131
ok all good
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Mrfiat's fiat 131
Lots of work since my last update! i even managed to start it tonight! here are a few pics of the bits and pieces and the final product.
- If you cut a bit of the commodore ignition module holder off and drill two extra holes it makes a perfect support for the 4cyl module.
- 20130531_152849 (Medium).jpg (183.17 KiB) Viewed 6390 times
- Bracket on car to mount coils
- 20130629_213749 (Medium).jpg (128.42 KiB) Viewed 6390 times
- surge tank mounted in boot
- 20130709_172113 (Medium).jpg (168.59 KiB) Viewed 6390 times
- Custom CNC cut trigger wheel bolted to back of standard pulley
- 20130724_111659 (Medium).jpg (199.54 KiB) Viewed 6390 times
- 20130724_111709 (Medium).jpg (223.28 KiB) Viewed 6390 times
- 20130724_111725 (Medium).jpg (170.06 KiB) Viewed 6390 times
Last edited by mrfiat on Wed Jul 24, 2013 10:20 pm, edited 1 time in total.
Re: Mrfiat's fiat 131
- ABS sensor mount
- 20130724_141449 (Medium).jpg (192.16 KiB) Viewed 6388 times
- engine
- 20130716_235401 (Medium).jpg (193.47 KiB) Viewed 6388 times
- 20130716_235408 (Medium).jpg (161.3 KiB) Viewed 6388 times
-
antus
- Site Admin
- Posts: 9002
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Mrfiat's fiat 131
Nice professional looking setup. So she started on the delco?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Mrfiat's fiat 131
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
vs ss
- Posts: 590
- Joined: Thu Nov 03, 2011 7:57 pm
- cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1 - Location: perth wa
Re: Mrfiat's fiat 131
Very nice 
Looks like it was meant to be there.
Looks like it was meant to be there.
Re: Mrfiat's fiat 131
Sure did! Its running the tune from Festy's alfa at the moment..it needs tweaking obviously but since the fiat and alfa engine are of a similar design its a good starting pointantus wrote:Nice professional looking setup. So she started on the delco?
Re: Mrfiat's fiat 131
Cheers for the kind words guys!
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Mrfiat's fiat 131
Fantastic work Looks really neat.
Looking at the pick up mount your using the commodore ABS sensor instead of the Falcon, did the Falcon one not work or just went with the tried and tested ABS sensor?
Looks really neat.Looking at the pick up mount your using the commodore ABS sensor instead of the Falcon, did the Falcon one not work or just went with the tried and tested ABS sensor?
-
delcowizzid
- Posts: 5627
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Mrfiat's fiat 131
vid or it didnt happen LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem