Generator Idle
- antus
- Site Admin
- Posts: 8292
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generator Idle
we've just been discussing pcm differences over in this thread viewtopic.php?f=7&t=5254&start=20#p77676
The1 mentioned that v6 n/a computer doesnt have variable speed pump control but is otherwise the same. If your doing an engine transplant and not planning on using the variable speed pump control you'll be ok, will just need to flash a s/c enhanced bin on a memcal and plug that in.
The1 mentioned that v6 n/a computer doesnt have variable speed pump control but is otherwise the same. If your doing an engine transplant and not planning on using the variable speed pump control you'll be ok, will just need to flash a s/c enhanced bin on a memcal and plug that in.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
Thank's ant .. i can't tell much diference in these PCM's ... im not using variable pump ...
when i get the sc engine on the test stand in a coupla week's i will try it and let you know......
mabee a dual tb manifold would be a novelty for my gen ... ?
when i get the sc engine on the test stand in a coupla week's i will try it and let you know......
mabee a dual tb manifold would be a novelty for my gen ... ?
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
just an update for those interested ... i have tried several ways to go about throttle control , i have come back to using the ECU and the factory ISC
... it has the fastest response time (better than the cummings governor) it holds speed +/- 50-100 rpm or so when dumping 14KW on and off ...
that's only about 3Hz ... i have it basically installed and running the whole property through an auto C/O transfer switch .... im fairly happy with it so far ...
any thoughts pls let me know....
... it has the fastest response time (better than the cummings governor) it holds speed +/- 50-100 rpm or so when dumping 14KW on and off ...
that's only about 3Hz ... i have it basically installed and running the whole property through an auto C/O transfer switch .... im fairly happy with it so far ...
any thoughts pls let me know....
- vlad01
- Posts: 7849
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Generator Idle
Nice job, glad it worked out.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Generator Idle
That's some generator jesus
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Generator Idle
love the paint job, gotta pimp the genie
how long do you get out of a tank of fuel ?
how long do you get out of a tank of fuel ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
runs sweet....i scored a 100 ltr ally tank... i think it sucks around 2ltr / hour.... but not 100% sure yet ....
engine is fully rebuilt ... 20 thou oversize.. rings,full bearings.. recon everything .. and for sale in adelaide ,make me an offer..
can hear running...going to replace with SC V6...
engine is fully rebuilt ... 20 thou oversize.. rings,full bearings.. recon everything .. and for sale in adelaide ,make me an offer..
can hear running...going to replace with SC V6...
- vlad01
- Posts: 7849
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Generator Idle
I see you did a vlad spec there with marking the bolts and screws.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8292
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generator Idle
Thats awesome. Thanks for the pics! Also glad it worked out.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Generator Idle
What are those rocker cover bolt seals over the factory one splitting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem