pman92 you misread. I said I don't have a bench setup, not that I can't flash. I've done 20+ full enhanced bin writes in-car, never had a failure. Got 4 PCMs on the floor of my car right now. I use a balance charger. Different method to what you recommend, same result.
I'm used to doing full OS writes when I patch, not just cal writes. even just for immo off and checksum bypasses sometimes things can only be programmed in a full read on other ecus, i have xdfs that apply patchs to my full reads, they call the padded cal read a partial read in other flash tools, i have to physically ground a pin as you connect to the flashing software galleto 1260, you might have done this before yourself, on different platforms before this. This isn't my first rodeo, I have a lab setup for other stuff too. i have european bench setup for european ecus. it would take me fuck all to make a setup up for bench flashing. just conflicting info on here across multiple topics. and especially with hardware stuff if it fucks up a pinout on a arduino/esp code. you get magic smoke already had that happen, again i flash in car and can send video after video of full reads and writes, partial/cal reads and writes are only for tuning the calibration area. i keep seeing people say it bricks when they flash just a enhanced bin in car. are they using a balance charger at over 13.5v. sometimes i dont even use the balance charger and my battey is at 12.4v and it works, dont breath when you flash is the trick lol,
the disassembly question was about CPU offsets vs XDF offsets for loading the file correctly, not whether I know what disassembly is. I have disassembled and decompiled a lot. im used to ecus that have a eeprom in the tcm with its own tune seperate and they have larger eeproms in the first place so bank switching isnt even needed. byte swapping and inverted and byteswapped inverted is used in some of those ecus RE to so different ball park. i am trying to automate something a human can do already. i could of done this without it with the same tools everyone uses and didnt. and got pretty far with it considering i didnt use ida pro or ghidra at all mate... have my own custom python dissasmbler now
https://www.facebook.com/reel/1348211433686812
https://www.facebook.com/reel/1210596856670942
I shared one post one time to a few facebook groups, don't you do that too mate? That's not spamming anything anywhere.
Rhysk94 what exactly did I embarrass you with on facebook? You keep saying this but won't say what I've done with any evidence, just shots in the dark at me and anyone you come across. Considering all I see is you saying the same thing to people for years and years now like a spambot in comments on everything that threatens your business or something, but it's consistent and bullying, no one is right but you, degrading comments, nothing nice ever bro. Even the people in this forum, you're in the wrong place to say get a Link ECU by the sounds of the website's name. If you've got a problem with something specific, say it. Otherwise you're just throwing shit. I have been on pcmhacking for a short time and this is my second topic. Check the date. Can click on my profile and literally see what I'm doing mate. To the people that hurt you before me I'm sorry for that, sounds like you've had an issue with this for a long long time before I came along, there's a lot of words that can be used to describe this and your repetitive behaviours. to insult my intelligence and others constantly says alot about yours. literally you are the person on here you are embarressed of or something i dont get it at all.
Also worth noting, you received the entire Enhanced Mod system from The1 & Wade for free (Topic 2518), got DTC masking help, had VX L67 Getrag help you find idle spark tables (Topic 8605), and got wiring diagrams from Charlescrown. You've taken knowledge from this community and monetized it as RKGarage Performance while gatekeeping when others ask. Topic 8851, someone asks about ghost cam, your response: No. Topic 8567 spark cut development thread: Just go a Link ECU, which I think is dumb when people go on about time is money, money is money that's why we are pcmhacking in the first place, OEM ECUs are cost effective. That's your contribution pattern, receive help, monetize it, then tell others to buy aftermarket when they ask the same questions you did.
Chr0m3 if you want to release your patches and research I'd genuinely appreciate it and would learn from it properly. Not trying to compete with anyone here, just trying to get spark cut working on my car and documenting it along the way. If the thread gets shut down that's fine, the github stays up either way. happy to work with whatever approach works best. The Monte Carlo elimination I was doing was meant to speed things up but clearly caused more noise than signal. If releasing your patches gets this done properly, I'm here to learn and test, not compete, alot of people have asked for mafless constantly i see it on facebook and then here for ecotec. i know could just use a map based ecu but i was looking into why it hasnt been done yet.
antus I get the concern about AI crawlers training on wrong info from the site. happy to flag my posts
(its pretty clearly labelled) or keep experimental stuff on github only if that helps..
in my head i came in thinking people get helped when they ask on this site from looking at previous topics before i even started this one its funny the ones maddest are the ones who have wrote the biggest paragraphs asking for help then kept that info secret in there dm. remove the emotion from this and we might actually get somewhere.
funny things is the thread attacking AI is being indexed by AI, and humans have assumptions here and mistakes to
