
My Delcoed Rides
- delcowizzid
- Posts: 5630
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: My Delcoed Rides
every 10th in the 60' is 2 tenths at the other end its going to go seriously quick 

If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My Delcoed Rides
yeah well the only real difference in my quickest run and the others was the .1 quicker 60 plus probably the tranny being at its best, i looked at my second run (13psi) and it was still even dodgy there. the 2-3 shift in the 11.29 pass was definately really good compared to the others.
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5630
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: My Delcoed Rides
watch out for using the wastegate adjuster screw too mate.they are a ratshit design and by the time you have wound up the boost enough the gate doesnt open as far anymore and you end up not being able to get rid of enough exhaust i dont know why they even fit an adjuster must be a selling point LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My Delcoed Rides
i think i've got a pretty big gate for what i need so its probably not fully open anyways!
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My Delcoed Rides
finally got my hands on the outside the car vids
heres the 11.29 @ 123MPH pass.
[youtube]http://www.youtube.com/watch?v=YF2ul9TNHfg[/youtube]

[youtube]http://www.youtube.com/watch?v=YF2ul9TNHfg[/youtube]
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: My Delcoed Rides
great run! poor car in the other lane wouldnt have known what hit him 

- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My Delcoed Rides
for anyone that's interested, I finally got the time slips scanned!
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My Delcoed Rides
Well some good progress in the shed 
Got the high energy clutch friction plates for it, also got the 3rd gear piston machined to fit the 6 frictions in!!! So everything is coming together nicely

Got the high energy clutch friction plates for it, also got the 3rd gear piston machined to fit the 6 frictions in!!! So everything is coming together nicely

No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My Delcoed Rides
ok finally got the videos my mates brother took from the stands .... unfortunately he didn't get my last two runs (the 11.29 was one of them
) but never the less, good videos 
this is my first run, where I had the issue with 2nd gear or the shifter whatever it was, its at about half track and you can see the other car passes me after it then I start to catch back up.
[youtube]http://www.youtube.com/watch?v=IhOGFkSmBpI[/youtube]
and this is my second pass, was still on 13psi as above, but no tranny gear change issues!
[youtube]http://www.youtube.com/watch?v=LfipPN8KSYs[/youtube]


this is my first run, where I had the issue with 2nd gear or the shifter whatever it was, its at about half track and you can see the other car passes me after it then I start to catch back up.
[youtube]http://www.youtube.com/watch?v=IhOGFkSmBpI[/youtube]
and this is my second pass, was still on 13psi as above, but no tranny gear change issues!
[youtube]http://www.youtube.com/watch?v=LfipPN8KSYs[/youtube]
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: My Delcoed Rides
Love the commentary
"It's a small one... it's a mini one."
