REALTIME VX-VY n/a PCM
-
VX L67 Getrag
- Posts: 2971
- Joined: Sun Aug 02, 2009 11:16 am
- Location: Bayside, Melbourne, Victoria
Re: REALTIME VX-VY n/a PCM
Seems like the only way would be direct floppy solder to board & keep it as short as possible!
-
antus
- Site Admin
- Posts: 10012
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: REALTIME VX-VY n/a PCM
it would be possible to make up a board that plugs in the expansion header and provides a DIP socket, or PCM memcal compatible socket. You might need a couple of jumper wires, or could make it so that there are a couple of extra pins that land nearby the header where the signals are present at vias on the pcm pcb. A bit of work to develop. Not huge, not small, though. More than just a casual 1 night project.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396