Page 9 of 9
Re: REALTIME VX-VY n/a PCM
Posted: Tue Nov 19, 2024 7:11 pm
by VX L67 Getrag
Seems like the only way would be direct floppy solder to board & keep it as short as possible!
Re: REALTIME VX-VY n/a PCM
Posted: Tue Nov 19, 2024 9:35 pm
by antus
it would be possible to make up a board that plugs in the expansion header and provides a DIP socket, or PCM memcal compatible socket. You might need a couple of jumper wires, or could make it so that there are a couple of extra pins that land nearby the header where the signals are present at vias on the pcm pcb. A bit of work to develop. Not huge, not small, though. More than just a casual 1 night project.