Re: Mint VP V6 Sedan soon to be boosted!
Posted: Mon Jul 15, 2013 12:23 pm
you will get close to 340 without a cam on 15psi just turn it up till you get the number 
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
Mint VP V6 Sedan soon to be boosted!
Page 10 of 21
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Mon Jul 15, 2013 12:56 pm
hahaahah yeah well 15's the limit, its only got 2 bar map and probably a nice safe limit for a stock motor!
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Mon Jul 15, 2013 1:06 pm
you could get 20psi in there just dont let it rattle at all and the gaskets/engine will survive
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 12:23 am
well its official .... the motor is fucked 
did a leak down test on the driver side of the motor (cause its easy) and cylinder 2 is pretty much blowing straight into the crankcase and out the valley breather! the other two cylinders on that side were perfect and I didn't bother doing the hard side cause ... 1 or 4 fucked its got to come out!
it looks like its going to have to go in the corner for a while, the brother has other things on the cards he needs to finance first so this will have to wait!
did a leak down test on the driver side of the motor (cause its easy) and cylinder 2 is pretty much blowing straight into the crankcase and out the valley breather! the other two cylinders on that side were perfect and I didn't bother doing the hard side cause ... 1 or 4 fucked its got to come out!
it looks like its going to have to go in the corner for a while, the brother has other things on the cards he needs to finance first so this will have to wait!
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 12:27 am
Doh!
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 5:49 am
hopefully it might only be a blown head gasket
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 8:36 am
Oh that sucks to hear, so close. It really didnt like the overboost!
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 8:51 am
well it was, and I've just finished putting the heads back on ittrikky73 wrote:hopefully it might only be a blown head gasket
spoke to my engine reconditioning mate and he reckons its probably got too hot down the side of the piston and grabbed the bore just enough to deform the ring land and keep the ring stuck in the groove!
but yeah it does suck a bit! I guess that's the gamble we took when we just did the head gaskets!
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 10:15 am
Well that was not the ending I was hopeing to see after reading this thread... 
Re: Mint VP V6 Sedan soon to be boosted!
Posted: Fri Jul 19, 2013 10:34 am
its not the end 
just a minor setback! but yeah its disappointing. I was looking forward to dyno tuning it tomorrow to see what figures it made!
the up side to it, when it goes back together it will likely have better pistons and a more boostable cam hopefully!
just a minor setback! but yeah its disappointing. I was looking forward to dyno tuning it tomorrow to see what figures it made!the up side to it, when it goes back together it will likely have better pistons and a more boostable cam hopefully!