Page 10 of 10
Re: Bench top Engine Simulator for the P01/P59 Pcm
Posted: Fri Apr 25, 2025 4:48 am
by NSFW
Thanks. It's changed a bit since the last time I used it.
Re: Bench top Engine Simulator for the P01/P59 Pcm
Posted: Fri Apr 25, 2025 10:38 am
by AngelMarc
Yeah, I suspect you guys neck deep into reverse engineering are using tuner pro and maybe other things I never heard of.
Re: Bench top Engine Simulator for the P01/P59 Pcm
Posted: Sun Apr 27, 2025 12:38 pm
by AngelMarc
For the crank and cam signals. Looks good on oscilloscope. If somebody wants to test on ECU before I do.
https://www.youtube.com/watch?v=EXo97nUB3hk
Attached file is Arduino IDE code. By default it should output 1056 RPM crank and cam signals.
Add 2 TC4452V or similar (Speeeduinos use similar as a coil driver).
Removed attachment. Find updated download here
viewtopic.php?p=132744#p132744
Re: Bench top Engine Simulator for the P01/P59 Pcm
Posted: Mon Apr 28, 2025 11:22 am
by AngelMarc
AngelMarc wrote: ↑Mon Apr 28, 2025 10:47 am
https://www.youtube.com/watch?v=EXo97nUB3hk
Tested at over 9,000 RPM
I used a Pi Pico and a TC4452V.
It's all generic Arduino code; so grab your favorite micro controller and give it a try.
The oscilloscope is a VDS1022 if you care to know. They sell for $95.
It works.