$51 upshift pressure modifier
Posted: Wed Mar 09, 2011 10:09 am
I notice there's downshift ones does anyone know where the upshift ones are?
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
$51 upshift pressure modifier
Page 1 of 2
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 12:13 pm
Let me know the address the downshift tables start for each gear & I'll let you know where I think the upshift one's MAY start, as I think they are there?
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 12:21 pm
it's defined in holden202's xdf, starts at 298F for 2-1 29A3 for 3-2 and 29B7 for 4-3 Downshift Pressure Modifier PSI vs KPH
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 12:27 pm
OK now after having another look at it, it doesn't look like there'd be any room for it, unless 1 of the other tables is just named something different but does the same thing, like the 2-3-4- offset?
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 12:44 pm
VX L67, you missed the point. It IS defined in holden202s 51E xdf, no maybes about it, at the addresses the1 reported above. But since its in the xdf, just grab it from https://pcmhacking.net/forums/viewtopi ... &t=5#p5588 and use it.
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 12:54 pm
Sorry Ant, I think wire's may be crossed the addressed point he said was the downshift 1's, but he was looking for the upshift 1's?
Those downshift 1's in all the cal codes whether vs to vy all look really weird & over the place!
Those downshift 1's in all the cal codes whether vs to vy all look really weird & over the place!
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 1:06 pm
haha, yeh downshift ones are defined aready im after the upshift ones. Im wondering if the 2-3-4 Pressure offset (PSI) vs TPS option below it is it. It has positive psi values.
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 1:27 pm
LMAO, I believe that is what I said! thats all I was thinking too, but with the downshift 1's there's 3 bit's between each table & with the offset 1 there all together & is no room for the gaps before the following tables starts!
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 1:31 pm
LMAO yes you did!VX L67 Getrag wrote:LMAO, I believe that is what I said!
Re: $51 upshift pressure modifier
Posted: Wed Mar 09, 2011 2:08 pm
yeah your are correct "2-3-4 Pressure Offset (PSI) V's TPS" is the upshift ones ....
note these are purely pressure v's TPS .... i am not sure when these offsets are used, i prefer to edit these:
Normal Mode - Force Motor Pressure (PSI) V's TPS & KPH
Performance Mode - Force Motor Pressure (PSI) V's TPS & KPH
as they are the main pressure settings, not offsets.
however if you want to have more pressure in a certain gear then the individual tables for each mode is probably your ticket.
As you can see i started grouping alot of them all together in one 3d table, i didn't get them all done so its a bit all over the shop.
i don't know when "2-3-4 Pressure Offset (PSI) V's TPS" is used as its not tied to a certain mode ... it could be a global offset change for all modes ?!?!
note these are purely pressure v's TPS .... i am not sure when these offsets are used, i prefer to edit these:
Normal Mode - Force Motor Pressure (PSI) V's TPS & KPH
Performance Mode - Force Motor Pressure (PSI) V's TPS & KPH
as they are the main pressure settings, not offsets.
however if you want to have more pressure in a certain gear then the individual tables for each mode is probably your ticket.
As you can see i started grouping alot of them all together in one 3d table, i didn't get them all done so its a bit all over the shop.
i don't know when "2-3-4 Pressure Offset (PSI) V's TPS" is used as its not tied to a certain mode ... it could be a global offset change for all modes ?!?!