Dont know what I've done.
I just finished puting my car back ogether and cant connect tunerpro to ecm?
The flashtool appears to connect to port/com 13 but tunerpro only goes to 9.
what have i done wrong? it was working the other day?
can connect flash tool but not tunerpro
-
Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: can connect flash tool but not tunerpro
change the com port number for your interface in device manager to be a number in the available range.
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
antus
- Site Admin
- Posts: 9006
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: can connect flash tool but not tunerpro
Download v1.2.4. Its got bug fixes you want and autodetects all comports on the system and will let you use COM13. Get it from the oseplugin thread and note that you may also need to install the visual c 2010 redist which is also linked to there.
https://pcmhacking.net/forums/view ... ?f=3&t=590
https://pcmhacking.net/forums/view ... ?f=3&t=590
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
V8hilux
- Posts: 289
- Joined: Tue Oct 12, 2010 4:20 pm
- cars: v8 Hilux 4x4 383 turbocharged with th700 auto.
- Location: Inverell Northern NSW
Re: can connect flash tool but not tunerpro
I'm in thanks