Hi guys,
Just wondering if there is any option to input any more 0-5 Volt inputs on the 808 to monitor fuel & oil pressures
- Then compare on a table to rpm and output this to a spare output or rev limiter ?
Cheers.
Kurt
Fuel & Oil Pressure - monitoring
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Fuel & Oil Pressure - monitoring
If your running OSE12P it can be done. There is a spare 0-25v input that could be used or if your not running a wideband could use that 0-5v input. The flex table could be setup to switch on a warning light or have that fed back to switch between map a and map b to limit whatever you want.