VT and vy V6 XDF
VT and vy V6 XDF
Does any1 have a working xdf for vt v6 or vy v6 for tunerpro
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT and vy V6 XDF
https://pcmhacking.net/forums/viewtopic.php?f=28&t=162 its also in the holden xdf thread and theres another one in there as well
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VT and vy V6 XDF
ok i can open v8 files ok with the $a6 but not v6 and the $a5 in the xdf list doesnt match either
maybe im doing something wrong HELP?
maybe im doing something wrong HELP?
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT and vy V6 XDF
looks like theres about 10 different variants of the $A5 so it will depend on what bin you are trying to open most likely the spark tables etc are offset by one hex address making them look wrong what bin you want to open ill modify an xdf to suit
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VT and vy V6 XDF
let me know which of the vt tunes and xdfs on this site that work ok on tunerpro and if i need to offfset, let me know how much
Your help is appreciated mate i have a stock vy v6 bin i could post up if you want to help me make an xdf
Your help is appreciated mate i have a stock vy v6 bin i could post up if you want to help me make an xdf
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT and vy V6 XDF
post it here and ill move it to the holden bin file thread
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VT and vy V6 XDF
wont let me upload a file with a bin extension
where else can i upload it
where else can i upload it
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT and vy V6 XDF
zip it first it will upload then mate
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VT and vy V6 XDF
vy v6 ecotec auto how hard do you reckon it will be to make an xdf
- Attachments
-
- vyv6auto.bin.rar
- (51.81 KiB) Downloaded 330 times
- delcowizzid
- Posts: 5499
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT and vy V6 XDF
shouldnt be too hard depends what you need .with the maf tunes just spark makes them go pretty good ill move some stuff round in the VT xdf and should get a fair few settings ill have a look see now
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem