Hi,
There is a Scalar in the Series 3 XDF Called Lean Cruise - Minimum Road Speed to enable Hystersis.
Does anyone have a simple explaination of what this function is? Thanks in advance.
Lean Cruise Question
-
brindo
- Posts: 333
- Joined: Sun Jun 28, 2009 11:43 pm
- Location: Western Queensland
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 4:54 am
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
Re: Lean Cruise Question
The name is prob a little misleading, basically its the vehicle speed lean cruise drops out at. The other is the vehicle speed lean cruise is enabled. Both speed related lean cruise scalars together give some hysteresis of enable and disable.
So as an example, with "Lean Cruise - Minimum Road Speed to Enable" set at 70KPH and "Lean Cruise - Minimum Road Speed to Enable Hystersis" set at 64KPH. Lean cruise would be disabled until 70KPH but will stay enabled until the speed drops below 64KPH. So in this case you have 6KPH of hysteresis using both scalars.
So as an example, with "Lean Cruise - Minimum Road Speed to Enable" set at 70KPH and "Lean Cruise - Minimum Road Speed to Enable Hystersis" set at 64KPH. Lean cruise would be disabled until 70KPH but will stay enabled until the speed drops below 64KPH. So in this case you have 6KPH of hysteresis using both scalars.