Kalmaker N05 ADX Wanted

[yoda69]

Just went too look at a car and it has a Kalmaker N05 tune it.
Does anybody have an ADX for these, as Kalmaker added additional info to the datastream so it will be different to base Holden, and all N05 tunes are VN/P which were 160 Baud where Kalmaker used 8192, its in a 3082 (high speed 808) ECU.
Thinking may be easier to convert to $12P and go from there.

yoda69

[Jayme]

the NO5 data stream is pretty similar to NO3 which is pretty similar to $12. VL400 has an nNO5 adx in his collection for the logger support thread.

https://pcmhacking.net/forums/viewtopi ... =10&t=1815

it should work in TP5 natively (though its designed for the logger) but if it doesnt, it wont be hard to get working. see how U go.

[VL400]

Yeah thats the only ADX I have for N05

[yoda69]

Thanks guys. N03 in the ADX area (https://pcmhacking.net/forums/view ... ?f=10&t=29) appears to work OK, just need to adjust the MAP equation, I'll have a look at everything else and once modified post it back up as N05.
Helped with the first problem, IAC was at 255 steps at idle and the idle was still below desired, no wonder it kept stalling. Adjusted idle to around 20-25 steps hot and all appears OK.
Now to look into the rest of it.

yoda69

[Holden202T]

geez the butterfly must have been way shut