pcmhacking.net

Hi all,

Picked up a cheap vp v6 auto using memcal code BAAM0265. Runs nice and smooth with this installed. I read the memcal and then compared to the original factory bin BAAM0265 and they are 3 bytes different.

I have a spare memcal with SST 27SF512 installed, and have written the BAAM0265 bin file to it several times, but wont idle like original memcal. I have tried stacking the bin 4 times through tunerpro, also used offsets of C000h and 0xC000.

But still isnt the same. Any ideas?

Cheers

4 x stack is what you need with zero offset on the SST

Thanks, that did the trick. Turns out I had a crook eeprom, new one is fine.

Cheers