Hey guys
just want to double check my work with chip burning and that i have the complete bin to burn. bin is attached.
I have a willem gq-4x burner with chips m27c256b and burning with no offset and only one bin on the chip no switching is being used.
any feedback would be great.
confirming chip burning with 12p and 808
-
dmac_25
- Posts: 46
- Joined: Tue Jul 20, 2010 3:04 am
- cars: Lots
- Location: Pakenham Victoria
confirming chip burning with 12p and 808
You do not have the required permissions to view the files attached to this post.
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: confirming chip burning with 12p and 808
I gave it a quick look over it in a hex editor and it looks ok. The code portion is there (as well as cal), its the right size, and its correct that it'll be a no offset burn on to that chip. I notice your on v110 from the end of 2010 rather than v111 but thats ok, no major problems in v110 though it could be updated. I havnt sanity checked the tune, but your burning sounds and looks on track.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
dmac_25
- Posts: 46
- Joined: Tue Jul 20, 2010 3:04 am
- cars: Lots
- Location: Pakenham Victoria
Re: confirming chip burning with 12p and 808
Yeah i have updated now this car is an old job thats been waiting to come back in and burn a chip for after it got tuned. cheers for having a look over the bin gives me piece of mind knowing its going to run lean when put on the dyno to triple check the tune