pcmhacking.net

Posted: **Thu Apr 17, 2014 9:45 pm**

I'm about too embark on fitting a computer from a VN v6 too my 74 LH Torana
And I need to know how many pickups are needed for the crank angle sensor to work
I will be making a exciter ring that will fit too my harmonic balancer and mounting the sensor on the timing cover, and I wondering if I need too copy same number that the 3.8 has or can I just make it six?
Any help would be good.

Posted: **Thu Apr 17, 2014 10:04 pm**

What is the motor 6 or 8 ??

Are you planning to run it without the dizzy or keep that to distribute spark still ??

Posted: **Thu Apr 17, 2014 10:09 pm**

It's a turbocharged 202 and I want too run the coil packs.

Posted: **Thu Apr 17, 2014 10:11 pm**

If I could work out how too put up some pics I'll show you my setup

Posted: **Thu Apr 17, 2014 10:28 pm**

: 1-2.jpg (114.02 KiB) Viewed 5915 times

Posted: **Thu Apr 17, 2014 10:29 pm**

Hence why I don't want a distributor underneath my manifold.

Posted: **Thu Apr 17, 2014 10:31 pm**

Posted: **Thu Apr 17, 2014 10:35 pm**

Posted: **Thu Apr 17, 2014 10:39 pm**

jzed head nice.

Posted: **Thu Apr 17, 2014 11:08 pm**

Should make some decent power.

pcmhacking.net

Trigger points for CAS.

Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.

Re: Trigger points for CAS.