Hi Ill keep this short.
Can I use a 424 to control the trans and a Holley HP ecm to run a 5L turbo.
I want to do this because I have the Holley unit and its wideband . And self tuning software.
Ive done a bit of tinkering with tuner pro and am happy with the results so far but my computer skills are not up to doing TP live .
Another reason is that I live at least 500k north of the nearest competent help.
Cheers Nathan
4L60e trans controll.
-
antus
- Site Admin
- Posts: 9017
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 4L60e trans controll.
Yes, but you'll need to duplicate enough of the sensor signals to keep the 424 happy (at a minimum the rpm signal from the stock sensor and coolant/intake temp sensors, and TPS. VATS wont stop the car because its a fuel pump and your running another ecm for that.)
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396