CAN bus connection from vipec
-
Jervies
- Posts: 199
- Joined: Wed Nov 09, 2011 7:35 am
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
CAN bus connection from vipec
Looking at the features this ecu has and it supports a lot of stuff over the bus system, the question being would it be possible for it to talk to the vt bcm/dash ect?
-
delcowizzid
- Posts: 5709
- Joined: Sat Feb 28, 2009 10:38 am
- Yahoo Messenger: [email protected]
- Location: Wellington NZ
Re: CAN bus connection from vipec
vt bcm and dash is aldl not can.you may be able to mess around with a ls1 PIM module and get some form of can to aldl working im not sure
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
Jervies
- Posts: 199
- Joined: Wed Nov 09, 2011 7:35 am
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: CAN bus connection from vipec
I like the idea but sounds well outside my league.
So the ls1 pcm runs can and converts it to aldl?
So the ls1 pcm runs can and converts it to aldl?
-
delcowizzid
- Posts: 5709
- Joined: Sat Feb 28, 2009 10:38 am
- Yahoo Messenger: [email protected]
- Location: Wellington NZ
Re: CAN bus connection from vipec
actually youde have to be later than vt it would be obd2 vpw i think not can
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
antus
- Site Admin
- Posts: 10015
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: CAN bus connection from vipec
Yeah ls1 isnt can. You'd need the pim from a 2007 vz with l98 as they are can and aldl. But.. I have no idea how the buses are bridged.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396