Can't connect flash tool or tunerpro ?

[Nitro Worms]

I've run into a problem with my ose12p equipped 808 and not sure what I've done wrong. been connecting to tunerpro fine last 2 days then
I decided to try and connect with the flashtool and now I can't connect to ecm at all.?

I was trying to upload a fresh version of ose12p and a fresh tune but it's a complete fail

I have tried:

setting the comms ports in programs/comms
lots of different combinations of settings in the flash tool.
disconnecting delco from car.

I'm running tunerpro RT5

any ideas?

Thanks

[Dylan]

Have you verified the comm port number in device manager? Different USB ports can change that number sometimes.

[Nitro Worms]

the device manager lists 3 comms as being in use so i just picked a different one and set flashtool, and options inn tunerpro the same.
I just uninstalled tunerpro and deleted the flashtool along with the plugin and doownloaded all new stuff so i will go up to the car now and try that.

[Dylan]

Put up a screen shot of device manager if you still have trouble

[Nitro Worms]

yeah, I can't get it to connect at all. when i plug my usb from laptop into the usb fitting i soldered into the delco 808 the lights come on ecu and
in device manager it shows the port in use I can choose any port i like up to 30 or so and then in options for tunerpro plugin my chosen port from device manager highlights as an option so all appears ok. I think there is something wrong with the nvram or ecu? either that or something i downloaded is not compatible with this windows 8 ?

[Dylan]

I dont follow what you men buy choose any port number. I always use the one windows assigns to it.
Did use windows driver or manually install the FTDI one's?

[Nitro Worms]

windows assigns a port and i then enter that number into tunerpro oseplugin configs and the flashtool configs but doesnt connect. I then tried manually changing the ports in device manager but no joy. the drivers are windows assigned and when i cick update drivers it says i already have the best drivers working.

[Nitro Worms]

It's like as if my nvram ose12p has dissapeared somewhere?

[Dylan]

Oh yep chooses com port in tuner pro. Sorry thought you meant in window's. In windows 7 I had to install FTDI manually but with windows 10 whatever it installed works fine.

Try different echo setting maybe?

[Nitro Worms]

I tried turning echo on and off. I have an old laptop here I will download tunerpro and the other stuff to it and try that. If It doesnt connect I wil have to send it to someone on here to see if ose12p needs to be re installed onto nvram ? or could I download the ose12p and get a local jaycar dealer to burn it onto the nvram?