Page 1 of 2
L67 enhanced 2bar map
Posted: Sat Feb 17, 2018 1:27 pm
by Wade
Has anyone set up a 2bar map sensor with enhanced code? Ive got a 2bar map sensor sitting here and would be good to be able to remove the boost gauge and monitor and data log boost
Re: L67 enhanced 2bar map
Posted: Sat Feb 17, 2018 4:35 pm
by immortality
Yep. Use one of the spare input pins ( A5 or B10 ) and then modify the ADX, the calculation is in one of the other threads about data logging. Sorry, on my mobile atm so a bit difficult to search for the other thread.
Re: L67 enhanced 2bar map
Posted: Sat Feb 17, 2018 7:41 pm
by 0081
Yep i use one so.
You can pretty much run any 0-5v sensor you just need to set up the ADX so it desplays the data you want
Re: L67 enhanced 2bar map
Posted: Sat Feb 17, 2018 9:20 pm
by Wade
Ok I’ve copied the calcs over from the vs enhanced adx I found on here. How do I go about changing the history tables. I’m not using a left hand o2 sensor, so was thinking I could use one of those.
Re: L67 enhanced 2bar map
Posted: Sat Feb 17, 2018 10:21 pm
by Wade
Also going off the picture pin a to iat temp ground, pin b to pin a5. What’s a good pin on the pcm for the 5volt reference
Re: L67 enhanced 2bar map
Posted: Mon Feb 19, 2018 8:55 pm
by The1
if your wiring it to B10 or A5 then you can rename and change the calc of that item to match.
Re: L67 enhanced 2bar map
Posted: Wed Feb 21, 2018 6:58 pm
by Wade
ok I think ive got the adx sorted. found the calc for 2bar to psi and also copied the map ve and spark ve over.
Re: L67 enhanced 2bar map
Posted: Thu Feb 22, 2018 1:45 pm
by 0081
What do you mean copied the map ve and ve spark over?
Re: L67 enhanced 2bar map
Posted: Thu Feb 22, 2018 2:03 pm
by Wade
Will generate a map based map for both map ve fueling and map spark tables when data logging as well as logging boost in psi across the range
Re: L67 enhanced 2bar map
Posted: Thu Feb 22, 2018 2:12 pm
by Wade
Load it up and have a look at the history tables. Will find out if it all works soon