b1 checksum
b1 checksum
I am trying to do a vn group a tune AXFY0848 with knock disabled using b1 xdf it is a bit odd i can see the knock error flag but not kescoola is it the Max. Cool. Temp. For Cold AFR Table and how do i bypass checksum any ideas
Re: b1 checksum
may I ask why bother using the group A tune? unless you are using a group A manifold, its not much good to ya
Re: b1 checksum
It is for a group a manifold on a vn bottom end with a vn computer and modded harnessJayme wrote:may I ask why bother using the group A tune? unless you are using a group A manifold, its not much good to ya
- Doctor Bob
- Posts: 195
- Joined: Mon Mar 02, 2009 10:58 pm
- cars: VN, VT
- Location: Melbourne Vic.
- Contact:
Re: b1 checksum
AA will bypass the checksum
kescoola is at $33
kescoola is at $33
Re: b1 checksum
I added the kescoola to the b1 xdf at 33 and used this equasion 0.750000 * X + -40.000000 from a 5 d xdf and it says 50. degrees default should i be using a different one for that tune.
And it doesn't have the option to set aa to bypass checksum any idea what address that is at.
And it doesn't have the option to set aa to bypass checksum any idea what address that is at.
- antus
- Site Admin
- Posts: 8272
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: b1 checksum
Its the 'B1' program ID at offset 0x08 that needs to be set to AA to bypass the checksum test.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: b1 checksum
Ok cool thanks for the help i think i have it sorted i have uploaded a changed b1 xdf and a bin i modified with it if someone could check i have it right that would be great.
- Attachments
-
- AXFY0848 no knock AA.bin
- (16 KiB) Downloaded 267 times
-
- B1.xdf
- (32.5 KiB) Downloaded 264 times