Maf on earlier ecu’s
-
Wade
- Posts: 1229
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Maf on earlier ecu’s
Was looking through an article on auto speed, and found this. Sounds a lot like the ls1 411. But his saying it can be done on the earlier ecu’s
You do not have the required permissions to view the files attached to this post.
-
krusty
- Posts: 572
- Joined: Wed Jan 27, 2010 11:45 am
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: Maf on earlier ecu’s
There were a couple versions of Kalmaker software that used both MAF and MAP. Never tried them myself even though I have them so couldn't say if it's good or bad
-
vlad01
- Posts: 8550
- Joined: Mon Oct 08, 2012 8:41 am
- cars: VP I S
VP I executive
VP II executive
VP II executive #2 - Location: Kyneton, Vic
Re: Maf on earlier ecu’s
Its a nice idea but a good tuner can get MAP on 11P and 12P well within the physical limitations of the injectors and engine itself and of course the accuracy of the WB controller so its pretty moot. Easily able to get 0.1-0.2 AFR stability with MAP. Maybe MAF helped with the old kalmaker and old code as I recall the MAP resolution is quite poor compared to 11P and 12P.
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Maf on earlier ecu’s
Leon (awesome automotive) is a well known kalmaker guy, so that would likely be the software. I tend to agree, not necessary, but possible.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396