Page 5 of 7
Re: Real Time Modded Factory Bins
Posted: Tue Nov 30, 2010 7:49 pm
by turbov8
what a guy!!
cheers
Re: Real Time Modded Factory Bins
Posted: Tue Nov 30, 2010 7:57 pm
by VL400
One thing to be aware of is its using a 0-25.5v input so the resolution aint great when using a 0-5v output from the wideband (WIth it set for 10-20 AFR you wont get better than 0.2 AFR resolution on the reading).
If your wideband analog output is configurable then maybe knock the range down to what you expect to need to for tuning say 11-16 AFR. This will give you 0.1 AFR resolution.
Re: Real Time Modded Factory Bins
Posted: Tue Nov 30, 2010 8:05 pm
by turbov8
just confused about the input for the wideband
D7 looks like oxy sensor input??
Re: Real Time Modded Factory Bins
Posted: Tue Nov 30, 2010 8:09 pm
by VL400
VR V8 Auto is D7 for inj feedback, I think your looking at the manual diagram.
Re: Real Time Modded Factory Bins
Posted: Tue Nov 30, 2010 8:13 pm
by turbov8
i must be!! damn been labeled wrong
cheers
Re: Real Time Modded Factory Bins
Posted: Tue Nov 30, 2010 9:01 pm
by Holden202T
yeah vr vs v8 auto are d7 for injector line ... if you want to test it, touch it to earth and you'll blow the injector fuse
Re: Real Time Modded Factory Bins
Posted: Wed Dec 01, 2010 3:20 pm
by turbov8
Holden202 wrote:yeah vr vs v8 auto are d7 for injector line ... if you want to test it, touch it to earth and you'll blow the injector fuse
theres no need. i trust u guys. the things that have been accomplished by members of this site is amazing!!!!
Re: Real Time Modded Factory Bins
Posted: Sun Apr 24, 2011 5:26 pm
by krusty
Regarding the first post in this thread........
The below bin is available for download and is labelled as a VY s/c/ HSV tune which is DLTK to my knowledge. The XDF suggested is $A5K which is VT V6 and loads up fine in TP.
Question is, where did this bin come from as I'm under the impression it is modded and isn't a factory bin. I wouldn't mind writing something off to try in my VY L67.
VY S/C
Bin:
DDRJ_mod.zip
VY V6 S/C, XU6. A5K xdf is needed
(46.68 KiB)
Re: Real Time Modded Factory Bins
Posted: Mon Apr 25, 2011 2:08 pm
by antus
Yeah DDRJ looks like the vx s/c HSV variant which is why VL400 picked that one to do. As I understand it it will work on a VY. The s/c code is still based on the VT for vx and vy and runs from a memcal (not the vx/vy flash pcm). These bins are the factory ones, write code patched in to them to them to add the realtime functionality when running from NVRAM.
Re: Real Time Modded Factory Bins
Posted: Tue Aug 23, 2011 9:23 am
by The1
Putting a wideband in a VS V6 Auto here, using NVRAM for realtime tuning and have done the mod with pin B12 for wideband 0-5v feedback, it's logging fine in Tunerpro but car wont run, just starts then stalls basicly, from looking at different wiring diagrams it seems that pin B12 supplys the DFI module as well? Or am i miss reading something?