Wanted memcal for 97 vs ii v6 getrag ute
Posted: Fri Nov 20, 2020 2:18 am
Hi guys I've been searching for quite a while now on a memcal for my ute as its had a cam installed. Only place I found was chip torque and they want nearly 900 bucks for a memcal
Mod list:
Mace stage 3 cam package
224°/224° at .050"
Intake Lift .335" (.536" lift at 1.6:1 rocker ratio)
Exhaust Lift .335" (.536" lift at 1.6:1 rocker ratio)
113 LSA
Pacemakers and a 2.5 inch exhaust middle muffler no rear muffler. Stock cat
Vs style OTR
Getrag 5 spd
I have asked mace about a chip but they don't do them for the stage 3. Any help or pointers in the right direction would be appreciated. Located cq in Queensland
Thanks guys
Mod list:
Mace stage 3 cam package
224°/224° at .050"
Intake Lift .335" (.536" lift at 1.6:1 rocker ratio)
Exhaust Lift .335" (.536" lift at 1.6:1 rocker ratio)
113 LSA
Pacemakers and a 2.5 inch exhaust middle muffler no rear muffler. Stock cat
Vs style OTR
Getrag 5 spd
I have asked mace about a chip but they don't do them for the stage 3. Any help or pointers in the right direction would be appreciated. Located cq in Queensland
Thanks guys