Please remove
-
Kaseem757
- Posts: 1
- Joined: Sun Dec 27, 2020 8:53 pm
- cars: Golf mk5
Please remove
Please remove
Last edited by Kaseem757 on Thu Dec 31, 2020 8:30 pm, edited 1 time in total.
-
Tazzi
- Posts: 3626
- Joined: Thu May 17, 2012 10:53 am
- cars: VE SS Ute
- Location: WA
Re: GMC E90 ECM
Right so I have done a bit of research into all of this.
Im pretty sure the following is done when the 'unlocking' occurs:
1) The ECU is pulled apart like you have done, and they use a glitcher (such as chipshouter) to bypass chip security and dump/edit the CPU.
2) Once dumped, they can modify the boot code to accept non-encrypted flash, they then write that back in and all done.
Im pretty sure the following is done when the 'unlocking' occurs:
1) The ECU is pulled apart like you have done, and they use a glitcher (such as chipshouter) to bypass chip security and dump/edit the CPU.
2) Once dumped, they can modify the boot code to accept non-encrypted flash, they then write that back in and all done.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726