Strange 11P Issue with copying tables

[someguy360]

Hi Guys,

This is going to be a strange one but probably me doing something stupid.

I've recently changed to the 11P v104 build for my VR instead of my questionable XDF I was running my old tune with. Ever since when I attempt to copy an entire table from a compare bin it only copies the last cell in the table and applies it to all cells in the working bin.



Has anyone seen this issue before?

Any help would be much appreciated, i'm sure it's something really simple but it's driving me insane having to copy each individual cell manually when I used to be able to just highlight the whole table and copy paste.

Cheers

[antus]

short answer, no. longer question - we need to know what hardware you have and what version of oseplugin, and if you get the 'success' green flash at the bottom of the screen when you save the change, and if you can log without any problems.

having said that I cant see anyway this is possible at all, so something must be fundamentally wrong.

[immortality]

Are you using keyboard shortcut keys or are using the mouse and right click and copy select all?

[Dylan]

Often when going to say 11P or 12P it can be a good excuse to start again. I don't know your engine, but tables like shown above don't always need to be changed.

Also when copying tables it's often better to copy the binary values especially when coming from a questionable XDF file.

[someguy360]

Thanks for the feedback all.

Turns out it was actually a bug with the version of RT I was running.

Fixed in a build a week or two ago.

Cheers

[Dylan]

Fantastic

[immortality]

LOL, I might need to check my version and update....